Fall Protection
Anchorage Connectors

DBI/Sala Tie-Off Adapter 3'

1003000
$50.00
  • Pass-through design makes attaching to anchorage quick and easy
  • 1-3/4" polyester strength member (5,000 lb. Min. tensile strength)
  • 3" wide polyester wear pad for added abrasion resistance and product longevity
  • 3 ft. in length, other lengths available
  • Coated steel hardware for corrosion resistance and strength
  • Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359
#

Scaffold Choker with D-Ring

1201390
$27.50
  • Choker style makes attaching to anchorage quick and easy
  • 1" polyester strength member (5,000 lb. Min. tensile strength)
  • 17 inches in length
  • Fits 3" maximum diameter structure
  • Coated steel hardware for corrosion resistance and strength
  • Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359
#

DBI/Sala Saflok Carabiner

2000113
$94.50
  • Gate Face withstands a load of 3,600 lbs. (up from 220 lbs.)
  • Side of Gate withstands a load of 3,600 lbs. (up from 350 lbs.)
  • Minor Axis withstands 3,600 lbs.
  • High strength construction with a minimum tensile strength of 5,000 pounds
  • Compatible with most connecting rings
  • Meets or exceeds all applicable industry standards including OSHA and the the new 2007 ANSI Z359 standard
#

Triple Action 2" Opening Carabiner

2000300
$100.00
  • Zinc plating offers maximum corrosion resistance to stand-up to the toughest environments, providing added longevity
  • With an overall 5,000 lb (22kN) strength and 3,600 lb (16kN) gates, our hooks provide strong, fast and safe connections
  • Simple operation even while wearing gloves makes connecting components of your fall protection system together fast and easy for added worker satisfaction and productivity
  • Versatile choice to securely attach one component to another and offers maximum strength and durability Many different sizes are available to suit specific jobsite requirements
  • 2 in (51mm) gate opening steel carabiner with self closing/triple-action locking gate
  • Meets or exceeds all applicable industry standards including OSHA and the the new 2007 ANSI Z359 standard
#

Concrete Anchor Strap with D-Ring

2100050
$9.00
  • Disposable anchor strap is designed to provide a temporary anchorage on concrete forms
  • Loop on end of anchor slips over rebar, concrete is then poured on top of loop and wear pad
  • Once concrete sets, a safe 5,000 lb. fall arrest anchorage point exists
  • When no longer needed, simply cut strap and discard
  • Durable 1-3/4" polyester webbing construction with full length outer wear pad for ultimate abrasion resistance
  • Forged alloy steel D-ring provides compatible connection point for your lanyard or self retracting lifeline
  • Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359
#

DBI/Sala D-ring with Anchorage Plate

2101630
$39.00
  • Can be bolted or welded to structure
  • Two 1/2" diameter attachment holes
  • Stainless steel construction for durability
  • Plate size: 1/4" x 2" x 4-1/2"
  • Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359
#

DBI/Sala Saflok Carabiner

2000114
$90.00
  • Gate Face withstands a load of 3,600 lbs. (up from 220 lbs.)
  • Side of Gate withstands a load of 3,600 lbs. (up from 350 lbs.)
  • Minor Axis withstands 3,600 lbs.
  • High strength construction with a minimum tensile strength of 5,000 pounds
  • Compatible with most connecting rings
  • Meets or exceeds all applicable industry standards including OSHA and the the new 2007 ANSI Z359 standard
#

DBI/Sala Saflok Carabiner

2000112
$49.50
  • Gate Face withstands a load of 3,600 lbs. (up from 220 lbs.)
  • Side of Gate withstands a load of 3,600 lbs. (up from 350 lbs.)
  • Minor Axis withstands 3,600 lbs.
  • High strength construction with a minimum tensile strength of 5,000 pounds
  • Compatible with most connecting rings
  • Meets or exceeds all applicable industry standards including OSHA and the the new 2007 ANSI Z359 standard
#

DBI/Sala Concrete D-ring Anchor

2104560
$101.00
  • A simple, versatile and safe concrete anchor solution – for use in temporary or even permanent applications
  • Re-usable D-ring assembly, just install a new bolt and it’s ready for use again
  • Rugged design for harsh environments with no moving or fragile parts to foul-up
  • Safe “hook-up” indicator notifies the user the anchor has been installed properly
  • For flexibility, install into 11/16”, 18mm or 3⁄4” holes – only standard drill bits needed
  • 5,000 lb. rated, OSHA compatible connection point swivels 360 degrees for safety and usability
  • Meets or exceeds all applicable industry standards including OSHA, ANSI and ASTM E488 Standard Test Methods for Strength of Anchors
#

DBI/Sala Permanent Roof Anchor with Cap

2103670
$73.00
  • The cap \hides the anchor providing the homeowner with an aesthetically pleasing roof line
  • Simply install by clamping onto joist, rafter, etc. (roof member)
  • Complete with thermoplastic flashing to prevent water leakage through the roof
  • Fits up to 2x8 roof truss, joist or rafter
  • 5,000 lb. Minimum breaking strength
  • Meets or exceeds all applicable industry standards including OSHA and ANSI
#

DBI/Sala Reusable/Removable Roof Anchor

2103673
$95.50
  • Removable/Reusable 1/4" thick steel roof anchor
  • Complete with zinc plated forged alloy steel O-ring
  • Nail (twelve 16d {penny}) or bolt (six 1/4"x2-1/2" or longer lag screws) into the sheathing and joist, rafter, etc. (roof member)
  • Designed to be removable, it may be used again after an inspection
  • 5,000 lb. Minimum breaking stregth
  • Length when flat = 25 inches - Weight = 4.4 lbs.
  • Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359
#

DBI/Sala Standing Seam Roof Anchor

2103675
$514.00
  • Swiveling design provides 360 degree mobility
  • Lightweight system installs in minutes with no special tools
  • Portable design and reusable on sloped or flat structural standing seam roofs.
  • Designed to use with Ultra-Lok self retracting lifelines (NOT included - must be purchased separately)
  • Telescoping adjustment legs fit 24", 30", 32". and 36" seam spacing
  • Meets OSHA and ANSI requirements.
#

DBI/Sala Sliding Beam Roof Anchor

2104700
$217.00
  • Dual beam grip adjustment prevents twisting and turning as it moves along the beam
  • Extremely lightweight at only 3.7 lbs (1.66 kg), with a user capacity of 420 lbs. (189 kg) and a minimum breaking strength of 5,000 lbs (22kn)
  • Replaceable synthetic wear pads
  • Fits flange 3-1/2" to 14" wide and up to 1-1/4" thick
  • Meets or exceeds all applicable industry standards including OSHA, ANSI A10.32, Z359.1 and EN795
#

DBI/Sala Concrete Detent Anchor

2101004
$284.00
  • Installs into 3/4 in. (19mm) precast concrete or steel hole
  • Use vertically in wall or overhead ceiling applications
  • Portable and reusable
  • Compact and lightweight design
  • High strength steel and aluminum construction
  • Rugged and corrosion resistant materials
  • Swiveling D-ring tie-off point
  • Activator cable for toggle mode selection
  • Toggle position indicator
#

DBI/Sala Steel Spreader Hook

2108403
$74.50
  • Ideal length allowing user to directly attach to the structure, leaving their hands free to peform tasks
  • Lanyards without shock absorbers are designed for restraint applications where there is no vertical free fall possible, or for work positiioning where the maximum fall is limited to 2 ft (06m) or less
  • Rugged construction endures rough use, standing up to long periods of outdoor elements for added longevity
  • Automatically locks and closes for added safety, and allow you to open and connect without getting your thumb or fingers in the way - even with gloves on
  • 10 in (25cm) steel spreader hook, self closing/locking, use with carabiner to form a positioning assembly
#