Machine Shield, Lathe.
ANSI B-11.6, ANSI B-11.89
These Transparent Lathe Chuck Shields are constructed with a tough semi-circular shape, made of high-impact-resistant polycarbonate. The actual shield, are attached to a 1” zinc-plated extension tube.
Half the circumference of the lathe chuck is covered by the semi-circular shield, because it is mounted an equal distance apart.
This shield is easily lifted up and out of the way when the operator needs access to the chuck and workpiece.
Shields are available from 10”-26” in diameter.
The shield size depends on the center height of the lathe and the diameter of the chuck. On lathes with a center height up to 7″, there is a small variation in diameter between the 3- and 4-jaw chucks; therefore, one size shield will do the job.
On lathes with a center height in excess of 7″, there is a greater variation in diameter between the chucks; therefore, it is advisable to use two different size shields to provide adequate protection.
This shield assembly does not include mounting bracket, We highly recommend ordering a mounting bracket when purchasing a Transparent Lathe Chuck Shield.
Frequently Asked Questions
We here at applesafety try to offer the best selection available to better serve our customers, see the Flexible Arm, Direct Mount Machine Shields Overview page.
If you cannot find what you need, please give us a call and we can provide you with a prompt and professional qoute.
|LXS-300||Lathe, Machine Shield, up to 10" Diameter||$221.00||8 lbs.|
|LXS-400||Lathe, Machine Shield, up to 14" Diameter||$278.00||8 lbs.|
|LXS-500||Lathe, Machine Shield, up to 18" Diameter||$311.00||8 lbs.|
|LXS-600||Lathe, Machine Shield, up to 23-1/2" Diameter||$351.00||8 lbs.|
|LXS-700||Lathe, Machine Shield, up to 26" Diameter||$367.00||8 lbs.|
These products are perfect for protecting operators from swarf, sparks, coolant and everything else that machine wants to throw.
These shields are built from a high-impact-resistant, 3/16” thick clear polycarbonate, handpicked for its extreme toughness and ability to protect the operator.
The semicircular shield covers half the circumference of the lathe chuck because it is mounted an equal distance from the chuck center.
The shield assembly does not include the mounting bracket, Purchase Mounting bracket seperately.
|Item:||Lathe Machine Shields|
|Shield Type:||Lathe Machine Shields|
|Shield Material:||High-Impact-Resistant, 3/16”-Thick Clear polycarbonate|
|Standards:||ANSI B-11.6, ANSI B-11.8|
These safety strips are perfect for minimizing the potential for workplace injury. Available in both solid and striped yellow, as well as 2” and 4” options. Made for a indoor or out, a variety of climates, temperatures and environments.